Repair broken or cracked rooflights with a galaxy rooflight. Increase thermal performance, fire safety and daylight quality with a new dome. Using the existing upstand on site, these retrofit rooflights can be installed onto a 100mm width timber frame or upstand. A minimum of 50mm is required. Rooflights are manufactured from 3mm imapct resistant polycarbonate glazing with triple layer u-value of 1.7 W/m²K. Available as clear of diffused.
|STOCK SIZES||ADDLITE PRICE (Double Layer)|
|600 x 600||£112.00|
|600 x 9000||£159.00|
|600 x 1200||£199.00|
|750 x 750||£140.00|
|750 x 900||£175.00|
|900 x 900||£169.00|
|900 x 1200||£224.00|
|1200 x 1200||£268.00|
|1200 x 1800||£422.00|
|1050 x 1050||£206.00|
|1050 x 1500||£320.00|
|Product Ref||Structural Opening Size||Min Ext kerb||Max Ext Kerb|
|ADD.RFK 60.60||600 x 600||510 x 510||610 x 610|
|ADD.RFK 60.90||600 x 900||510 x 810||610 x 910|
|ADD.RFK 60.120||600 x 1200||510 x 1120||510 x 1220|
|ADD.RFK 75.75||750 x 750||660 x 660||760 x 760|
|ADD.RFK 75.90||750 x 900||660 x 810||760 x 910|
|ADD.RFK 90.90||900 x 900||810 x 810||910 x 910|
|ADD.RFK 90.120||900 x 1200||810 x 1120||910 x 1220|
|ADD.RFK 120.120||1200 x 1200||1120 x 1120||1220 x 1220|
|ADD.RFK 120.180||1200 x 1800||1120 x 1730||1220 x 1830|
|ADD.RFK 105.105||1050 x 1050||970 x 970||1070 x 1070|
|ADD.RFK 105.150||1050 x 1500||970 x 1420||1070 x 1520|
Bring a fresh new look to your tired and old rooflights with a galaxy replacement kit. These kits provide everything you need to repalce old and damaged rooflights on site without the need to replace roofing material or insulation. The lid fits on top of the existing upstand providing there is a minimum 50mm frame to fit too. Replacement rooflights are supplied undrilled in order to suit the positionings and fixings required on existing kerb.
These rooflights can increase the light below, improve insulation and thermal properties and featrue the latest design and materials including 3mm impact resistance polycarbonate layers.
ADD.RFK hatches are designed to fit onto an existing upstand to ensure a low profile installation. Rooflights are supplied undrilled, in order to facilitate on site, positionings of the fixings to suit your kerb. Kits come with caps, screws and a weather strip which is used to ensure a weather tight seal between existing upstand and rooflight. The anti-burglar cover and cover caps ensure a safe and secure finish.