EN12101-2 is the European standard for smoke and heat control systems. According to the regulations, from July 2013, all natural smoke and heat ventilators must be tested and CE marked in order to confirm compliance with harmonised European standards.
Smoke Vents, EN 12101-2 and BS 9999
The main purpose of the compliance tests and CE marking is to ensure that all AOV’s are reliable and fit for purpose. The CE Mark also allows free movement of products within the European Market. Our AOV’s are sold with these key features:
- CE Marked to EN12101-2
- Thermally Broken Frame
- Custom made to any size up to 3000mm x 1800mm
- Available in glazed, solid top and/or with concealed actuators
- 300mm Upstand
- Can be wired direct into the BMS or FAS system
AOV Rooflight Polycarbonate Dome Smoke VentsEnquire Today
The Surespan AOV Rooflight top smoke vent offer exemplary functional safety and reliability, fully CE marked. The Ventilator can be supplied with a triple glazed polycarbonate dome in clear or diffused variants, The unit has a 300mm high thermally broken aluminium upstand that is suitable for use with the majority of roofing membranes.
The unit can also be used to incorporate natural day to day ventilation in your project. The Units actuators are off set within the aperture and this allows the unit to also be used for maintenance access to the roof of your project.
The units can be supplied to your free vent area requirements in either a geometric or aerodynamic value.
Smoke Ventilation SystemEnquire Today
Surespan SRHE/AOV 140° Smoke Ventilation System can be made to any size up to 1800 x 3000mm. They are fully compliant with EN12101-2 and CE Marked. The thermally broken, Aluminium single leaf smoke ventilator is operated by 24v DC actuator(s) and features electro-magnetic locking.
The lid and upstand are filled with 50mm thick CFC and HCFC free Polyisocyanurate insulation. This offers a high level of thermal insulation against heat loss and condensation, together with excellent sound absorption properties.
Smoke Ventilation System can be supplied with an offset mechanism for roof access as well as concealed actuators.
All of our smoke ventilators are manufactured to meet the requirements of Building Regulations, Approved Document B, BS9999 and EN12101-2 and are supplied CE marked.
SRHP 50 Roof Access Hatch with Thermal BreakEnquire Today
Surespan’s Aluminium Roof Access Hatches feature an unprecedented 25/50/75mm wide thermal break to provide the ultimate in thermal performance.
Insulation options include polyisocyanurate board or non-combustible mineral wool, to achieve a variety performance levels to suit project requirements.
Designed with options for manual gas spring assistance, featuring aluminium continuous hinges and an automatic hold-open safety stay to lock the lid in the open position to a 85° span.
For larger, heavier lids, consideration is to be given for powered assistance by 24v DC actuators, to ensure ease and safety of use is afforded to the operative.
A double unbroken EPDM seal ensures weather tightness, with an External Liner fitted as standard to allow for a variety of hot or cold applied weathering materials.
Available with a polyester powder coated dual finish upon request.
Set standard sizes are available from stock, with bespoke sizes made to suit project needs.
VLE Flat Roof VentsEnquire Today
Surespan Flat Roof Vents are ideal where there is a height restriction or risk of igh wind.
The lid is filled with 50mm of CFC and HCFC free insulation with a minimum U-Value of 0.43W/m²K to BS3958: Part 5: 1986. This offers a high level of thermal insulation against heat loss and condensation, together with excellent sound absorption properties.
Flat Roof Vents are offered with a control box including transformer, battery charger, and battery back up system to cover in case of emergency power cuts.